Electrical Panel Clearance Requirements: What You Can (and Can't) Store Near Your Breaker Box
Bikes, shelves and a second fridge have a way of drifting toward the breaker box. Here's what the code says, why it matters in an emergency, and how to fix it without moving the panel.
Published · Updated
10 min read

Electrical panel clearance requirements call for a clear working space in front of the panel at least 30 inches wide, 36 inches deep and 6.5 feet high, with nothing stored in it. That space lets anyone shut off power fast and lets an electrician work safely. Most blocked panels can be fixed by moving storage, not the panel.
- The working space in front of a residential panel is at least 30 inches wide, 36 inches deep and 6.5 feet high.
- That space can't be used for storage, even temporarily, including shelves, bikes and freezers.
- Panels can't go in clothes closets or bathrooms, and remodels have to keep them accessible.
- Blocked panels slow down emergency shutoffs and get flagged by inspectors.
- Most fixes are free: move the storage. Relocation is only for panels in the wrong place.
The garage filled up the way garages do. First the bikes, then a shelving unit, then a second fridge, and now the breaker box is somewhere behind all of it. Electrical panel clearance requirements exist for exactly this situation, and they matter more than most homeowners realize. When something goes wrong, the panel is where you cut the power.
Hamilton and San Marin homes in Novato often have the main panel in the garage, which is practical until storage takes over. This guide sorts the common myths from the facts, explains the numbers in plain terms, and shows the simple fixes that work in a real family garage.
If you're not sure what each part of your panel does, our guide to understanding your electrical panel is a good starting point. For upgrades and replacements, see our electrical panel upgrades overview.
Part of our guide to Electrical Panel Upgrades. It covers panel replacements, capacity and the code basics behind them.
What are electrical panel clearance requirements, in plain terms?
Electrical panel clearance requirements set aside a clear zone in front of every panel so it can be opened and operated quickly. For a typical home panel, that zone is at least 30 inches wide, 36 inches deep and 6.5 feet high, and it has to stay empty.
The clear area in front of electrical equipment that lets a person open it, operate it and work on it safely. It has minimum width, depth and height.
The zone directly above and below a panel, as wide and deep as the panel, that's reserved for electrical equipment. Pipes and ducts don't belong there.

These numbers come from the National Electrical Code's working-space rule, Section 110.26, which California adopts. The federal workplace version spells out the same figures publicly. OSHA's standard lists a 3-foot depth for equipment at 150 volts or less, a width of 30 inches or the width of the equipment, whichever is greater, and 6.5 feet of headroom.
The width doesn't have to be centered on the panel. It just has to be wide enough for someone to stand in front of it, and the panel door has to open at least 90 degrees. The depth is measured straight out from the front of the panel.
Myth: is panel in garage storage fine if you can still reach it?
No. Panel in garage storage is not fine just because you can reach past it. The working space must stay clear, and OSHA's version of the rule says plainly that working space may not be used for storage. Reaching around a bike to flip a breaker isn't what the rule protects.
What counts as panel in garage storage
- Shelving units, even if they stop short of the panel itself.
- Bikes, ladders and tools hanging or leaning in front of it.
- A second fridge or chest freezer parked in the clear zone.
- Boxes stacked on the floor, which tend to grow over time.
- Workbenches built across the front of the panel.
Seasonal storage is the sneaky part. Holiday bins come down in November, camping gear lands in the garage in summer, and the clear zone shrinks a little each time. Pick a permanent home for those items on a different wall, so the panel area never becomes the overflow spot.
The test is simple. Could you walk up to the panel in the dark, open the door all the way and stand square to it without moving anything? If not, the space needs clearing.
A Hamilton garage panel sits behind bikes, a shelving unit and a second fridge. Nobody could reach the main breaker quickly in an emergency.
Mark the 30-by-36-inch working space with floor tape, move storage to another wall, and label the circuits so the panel is easy to use.
The panel is reachable in seconds and passes an inspector's look. This isn't for panels in closets or bathrooms. Those need relocation planning, not a clear-out.
Why does working space in front of panel matter in an emergency?
Working space in front of panel matters because it's where you shut off power when something goes wrong. If an outlet is smoking, a circuit is sparking or water is reaching wiring, seconds count, and nobody should be moving a freezer to get to the main breaker.
The stakes are real. The U.S. Fire Administration estimates 24,200 residential building electrical fires in 2021, causing 295 deaths, 900 injuries and $1.2 billion in property loss. A clear panel doesn't prevent a fault, but it lets you respond to one quickly.
Working space in front of panel protects the electrician, too
Electricians work on panels with the cover off and conductors exposed. A clear 3-foot zone gives room to move, use test equipment and step back. Cramped space is how accidental contact happens, which is why the rule exists in workplaces and homes alike.
Think about who might need the panel in a hurry. A teenager home alone, a house sitter or a firefighter won't know your garage layout. Clear access and a readable directory let anyone find the right breaker without guessing or climbing over boxes.
Inspectors and home inspectors notice too. A blocked panel is a common item on reports, and our list of what home inspectors flag in electrical systems shows how often access shows up.
We'll check working space, update the circuit directory and flag anything that would come up on an inspection.
Myth: what do breaker box access rules say about cabinets and art?
Breaker box access rules allow a panel to be behind a door or a hinged cover, as long as the working space stays clear and the panel can be opened and operated without tools. They don't allow a cabinet, shelf or appliance to sit inside the working space.
| Myth | Fact |
|---|---|
| A hinged art piece over the panel is fine. | Usually fine if it opens freely and nothing is stored in front of it. |
| A cabinet built around the panel is fine if it has a door. | Cabinet shelves can't intrude into the 30-by-36-inch working space. |
| Storage only matters during inspection. | The space must stay clear all the time, not just on inspection day. |
| A panel can go in any closet. | Panels can't be installed in clothes closets. |
| Water heaters and pipes can sit above the panel. | The space directly above is reserved for electrical equipment. |
Breaker box access rules in finished spaces
In a finished hallway or mudroom, a flush cover or framed art can hide a panel neatly. The key is that it lifts or swings away without tools, and that no bench, coat rack or cabinet takes over the floor in front. Labels inside the door should still be readable, which is why a clear electrical panel labeling job pairs well with any cover.
What does panel location code say about closets, bathrooms and remodels?
Panel location code keeps panels out of clothes closets and bathrooms, and over the steps of a stairway. It also expects panels to stay readily accessible, so a remodel can't wall one in or build a closet around it.
Panel location code during a remodel
Remodels are when panels get into trouble. A new pantry, a garage conversion or an added laundry room can quietly turn the panel's spot into a closet or storage wall. Catch it in the design stage, when moving a wall line is cheap, rather than after the drywall goes up.
Garage conversions and ADUs deserve special care in Hamilton and San Marin, where many lots don't have room to spare. When a garage becomes living space or a studio, the panel often ends up inside a new room. The plan should show the working space on the drawings, so it isn't lost under cabinets or a closet wall.
If the panel truly has to move, that's a permitted job with planning behind it. The County of Marin lists electrical service upgrades among the permit types for unincorporated areas, and Novato issues its own permits for city addresses. Our guide to electrical panel relocation explains what's involved.
How do you meet electrical panel clearance requirements in a crowded garage?
You meet electrical panel clearance requirements in a crowded garage by marking the zone, moving storage out of it, and keeping it clear with a visual cue. Most families can do this in an afternoon without an electrician.
- Measure 30 inches wide and 36 inches out from the panel face, and mark it with floor tape.
- Move shelving, bikes and appliances to another wall.
- Hang a small flashlight near the panel for outages.
- Make sure the panel door opens all the way.
- Keep the zone clear as the seasons change and storage shifts.
If you're in Hamilton or San Marin and want a second set of eyes, our Hamilton electrician page covers local service, from panel checks to labeling.
Talk with a licensed C-10 electrician about access, labeling or relocation. Request your estimate or call our Novato office.
- NEC 110.26
- The National Electrical Code section that sets working-space rules in front of electrical equipment.
- Readily accessible
- Reachable quickly without climbing over obstacles, moving things or using tools.
- Main breaker
- The large breaker that shuts off power to every circuit in the panel at once.
- Circuit directory
- The labeled list inside the panel door that tells you what each breaker controls.
Frequently asked questions
How much clearance does an electrical panel need in a house?
A typical home panel needs a clear working space at least 30 inches wide, 36 inches deep and 6.5 feet high in front of it, based on the National Electrical Code rule that California adopts. The width can be wider if the equipment is wider. The panel door also has to open at least 90 degrees. Nothing can be stored in that space. Check with an electrician if your layout is unusual.
Can I put shelves on either side of my electrical panel?
Shelves beside a panel can be acceptable if they stay outside the working space in front of panel equipment, which is 30 inches wide and 36 inches deep, and don't block the door from opening fully. Shelves directly in front of the panel aren't allowed. Neither is anything that crowds the space a person needs to stand. Measure before you build. If the garage is tight, an electrician can help you plan the layout.
Is it a code violation to have a refrigerator in front of a breaker box?
Yes, a refrigerator or freezer in front of a breaker box puts it inside the required working space, which breaker box access rules say must stay clear and can't be used for storage. It also makes emergency shutoffs slower. Move the appliance to another wall. Keep its outlet away from the panel's clear zone. That fix costs nothing.
Can an electrical panel be in a closet?
Under panel location code rules, panels can't be installed in clothes closets, and they also don't belong in bathrooms or over stairway steps, because those spots make safe access difficult. A utility room or garage wall is common instead. Older homes sometimes have panels in places that wouldn't pass today. An electrician can tell you whether yours needs attention. Relocation is a permitted job.
How much does it cost to relocate an electrical panel?
The cost to relocate a panel depends on how far it moves, how many circuits must be extended, whether the service entrance and meter move too, and the permit and utility coordination involved. A short move on the same wall is very different from moving to another side of the house. Finished walls add work. We quote after seeing the panel, the meter and the new location.
Do electrical panel clearance requirements apply to older homes?
Electrical panel clearance requirements apply to how you use the space today, so storage in front of an older panel is still a problem even if the panel itself was installed under older codes. Existing installations aren't always forced to meet every new rule. Any new work or relocation follows current code. Keeping the space clear is good practice either way. An inspector will often flag a blocked panel.
Can I cover my electrical panel with a picture or cabinet door?
You can cover a panel with hinged art or a cabinet-style door if it opens without tools and the working space in front stays clear, but you can't build shelving or storage into that space. The cover should swing or lift away fully. Labels inside the panel should stay readable. Avoid anything that locks. An electrician can suggest a cover that works.
The working space in front of a home panel is at least 30 inches wide, 36 inches deep and 6.5 feet high, and it stays empty. Clearing storage fixes most problems at no cost. Panels in closets or bathrooms need relocation planning.

Founder of Healthcare Marketing Group and author of The Ultimate Guide to Digital Marketing. Previously led a digital marketing company with 8,000+ clients. Writes on local-service SEO and E-E-A-T content strategy.

Alex founded Towery Electric in Novato in 2014 after years wiring homes in San Francisco. He reviewed this article for technical accuracy on Oct 11, 2026.
- ✓ Licensed-contractor reviewed
- ✓ Primary sources cited
- ✓ Updated when code changes
We research every article from primary sources, including government safety agencies, code bodies and utility programs, and a licensed C-10 electrical contractor reviews it before it’s published. Our editorial standards →
Sources
- Occupational Safety and Health Administration. 29 CFR 1910.303, General requirements (electrical).
- U.S. Fire Administration (FEMA). Appliance and electrical fire safety.
- County of Marin Community Development Agency. How to apply for a building permit.
Changelog: Oct 11, 2026: first published after technical review by Alex Towery, C-10 #989290.
Disclaimer: This article is general educational information, not a site-specific electrical assessment or legal advice. Codes, utility programs and permit rules change, and every home’s wiring is different. Electrical work in California should be done by a licensed C-10 contractor with the required permits.
When to call: Call a licensed electrician if your panel sits in a closet or bathroom, if a remodel closed it in, or if breakers are unlabeled or hard to reach. If you see smoke, sparks or fire, leave the area and call 911 first.